論文

2019

  1. Effects of high-temperature thermal annealing on properties of aligned multi-walled carbon nanotube sheets and their composites, T. Huu Nam, K. Goto, Y. Shimamura, Y. Inoue, G. Yamamoto, K. Shirasu, T. Hashida, Compos. Interfaces. (2019) 1-18. DOI: 10.1080/09276440.2019.1670000
  2. Survivability of carbon nanotubes in space
    Yoji Ishikawa, Yasuhiro Fuchita, Takashi Hitomi, Yoku Inoue, Motoyuki Karita, Kohei Hayashi, Takayuki Nakano, Naoko Baba
    Acta Astronautica 165, 129-138 (2019). DOI: 10.1016/j.actaastro.2019.07.024
  3. Magnetic tunneling with CNT-based metamaterial
    Gunther Kletetschka, Yoku Inoue, Jan Lindauer & Zdeněk Hůlka
    Scientific Reports 9, 2551 (2019). DOI: 10.1038/s41598-019-39325-9
  4. Impact of growth temperature on the structural properties of BGaN films grown by metal-organic vapor phase epitaxy using trimethylboron, Kazushi Ebara, Ken Mochizuki, Yoku Inoue, Toru Aoki, Kazunobu Kojima, Shigefusa F. Chichibu, and Takayuki Nakano, Japanese Journal of Applied Physics 58 (2019) SC1042. DOI: 10.7567/1347-4065/ab1395
  5. Two step floating catalyst chemical vapor deposition including in situ fabrication of catalyst nanoparticles and carbon nanotube forest growth with low impurity level
    Toshiya Kinoshita, Motoyuki Karita, Takayuki Nakano, Yoku Inoue, Carbon 144, 152-160 (2019). DOI: 10.1016/j.carbon.2018.12.019

2018

  1. Improved mechanical properties of aligned multi-walled carbon nanotube/thermoplastic polyimide composites by hot stretching, Tran H Nam, Ken Goto, Toshiki Kamei, Yoshinobu Shimamura, Yoku Inoue, Satoshi Kobayashi and Shinji Ogihara, Journal of Composite Materials 2018 DOI: 10.1177/0021998318796916.
  2. Double-Polarity Selective-Area Growth of GaN by Metal-Organic Vapor-Phase Epitaxy Using Narrow-Pitch Patterns, Hirotaka Yagi, Noriyuki Osumi, Yoku Inoue, and Takayuki Nakano, “Phys. Status Solidi B 255 5 (2018) 1700475. DOI: 10.1002/pssb.201700475

2017

  1. “Development of large-movements and high-force electrothermal bimorph actuators based on aligned carbon nanotube reinforced epoxy composites”, Keiichi Shirasu, GoYamamoto, Yoku Inoue, Toshio Ogasawara, Yoshinobu Shimamura, and ToshiyukiHashida, Sensors and Actuators A: Physical, 267, 455-463 (2017).
  2. “Key factors limiting carbon nanotube strength: Structural characterization and mechanical properties of multi-walled carbon nanotubes”, Keiichi Shirasu, ItaruTamaki, Takamichi Miyazaki, Go Yamamoto, Raman Bekarevich, Kaori Hirahara, Yoshinobu Shimamura, Yoku Inoue and Toshiyuki Hashida, Mechanical EngineeringJournal, 4 (5), p.17-00029(11pp) 2017.
  3. “多層カーボンナノチューブの強度・破壊特性評価と構造欠陥の影響に関する研究”,玉木格,白須圭一,宮崎孝道,山本剛,RamanBekarevich,平原佳織,島村佳 伸,井上翼,橋田俊之,日本機械学会論文集,Vol.83,No.847,ArticleNo. 16-00283, 2017.
  4. “Potential use of CNTs for production of zero thermal expansion coefficient composite materials: An experimental evaluation of axial thermal expansion coefficient ofCNTs using a combination of thermal expansion and uniaxial tensile tests”, KeiichiShirasu, Akihiro Nakamura, Go Yamamoto, Toshio Ogasawara, Yoshinobu Shimamura,Yoku Inoue, Toshiyuki Hashida, Composites Part A, 95, pp.152-160 (2017).

2016

  1. “Rapid-response, widely stretchable sensor of aligned MWCNT/elastomer composites for human motion detection”, Katsunori Suzuki, Koji Yataka, Yasuro Okumiya, Shingo Sakakibara, Keisuke Sako, Hidenori Mimura, and Yoku Inoue, ACS Sensors 1, pp.817-825 (2016).
  2. “Effect of substrate offcut angle on BGaN epitaxial growth”, Kohei Ueyama, Hidenori Mimura, Yoku Inoue, Toru Aoki, and Takayuki Nakano, Jpn. J. Appl. Phys. 55, 05FD05 (2016).
    “Analysis of interface formation mechanism in GaN double-polarity selective-area growth by metalorganic vapor phase epitaxy”, Kenta Kuze, Noriyuki Osumi, Yohei Fujita, Yoku Inoue, and Takayuki Nakano, Jpn. J. Appl. Phys. 55, 05FA05 (2016).
  3. “Evaluation of interfacial shear stress between multi-walled carbon nanotubes and epoxy based on strain distribution measurement using Raman spectroscopy”, Shigeki Yashiro, Yoshihisa Sakaida, Yoshinobu Shimamura, Yoku Inoue, Composites part A85, pp.192-198 (2016).
  4. “Study of radiation detection properties of GaN pn diode”, Mutsuhito Sugiura, Maki Kushimoto, Tadashi Mitsunari, Kohei Yamashita, Yoshio Honda, Hiroshi Amano, Yoku Inoue, Hidenori Mimura, Toru Aoki, Takayuki Nakano, Jpn. J. Appl. Phys. 55, 05FJ02 (2016).
  5. “Preparation and Performance Evaluation of Electrothermal Actuators using Aligned Carbon Nanotube Reinforced Epoxy Composites”, Keiichi Shirasu, Akihiro Nakamura, Go Yamamoto, Toshio Ogasawara, Yoshinobu Shimamura, Yoku Inoue and Toshiyuki Hashida, Mechanical Engineering Journal, DOI:10.1299/mej.15-00607.
  6. “Cross-linking Multiwall Carbon Nanotubes using PFPA for Building Robust, Flexible and Highly aligned Large-Scale Sheets and Yarns”, Yoku Inoue, Kazumichi Nakamura, Yuta Miyasaka, Takayuki Nakano and Gunther Kletetschka, Nanotechnology 27, 115701(10pp) (2016).
  7. “Improving mechanical properties of high volume fraction aligned multi-walled carbon nanotube/epoxy composites by stretching and pressing”, Tran Huu Nam, Ken Goto, Yudai Yamaguchi, E.V.A. Premalal, Yoshinobu Shimamura, Yoku Inoue, Shuichi Arikawa, Satoru Yoneyama, Shinji Ogihara, Composites part B85, pp.15-23 (2016).

2015

  1. “Negative axial thermal expansion coefficient of carbon nanotubes: Experimental determination based on measurements of coefficient of thermal expansion for aligned carbon nanotube reinforced epoxy composites”, Keiichi Shirasu, Go Yamamoto, Itaru Tamaki, Toshio Ogasawara, Yoshinobu Shimamura, Yoku Inoue, Toshiyuki Hashida, Carbon 95, pp.904-909 (2015).
  2. “Effects of CNT diameter on mechanical properties of aligned CNT sheets and composites”, Tran Huu Nam, Ken Goto, Yudai Yamaguchi, E.V.A. Premalal, Yoshinobu Shimamura, Yoku Inoue, Kimiyoshi Naito, Shinji Ogihara, Composites part A76, pp.289-298 (2015).
  3. “Interfacial Oxygen Stabilizes Composite Silicon Anodes”, Chuan-Fu Sun, Hongli Zhu, Morihiro Okada, Karen Gaskell, Yoku Inoue, Liangbing Hu, YuHuang Wang, Nano Letters 15, pp.703-708 (2015).

コメントは受け付けていません。